Hydraulic press is also called sesame oil machine, sesame oil presses are mainly used in the processing of individual home production. The product belongs to the hydraulic automatic oil press, a small output, but simple and convenient.
Hydraulic press is mainly used for individual merchants processing edible oil, such as peanuts, soybeans, oil sunflower, rapeseed, walnut, cottonseed and so on, Hydraulic Oil Press almost all of the oil crops can be squeezed through the oil presses, and it is also some of the rural operation of the first choice of food business processing equipment. And the oil press is not subject to climatic constraints, the North and South seasons are appropriate, because the fuel plate device using a heating temperature control system, according to the ambient temperature, automatically adjust the temperature of the hair oil to achieve rapid filtration effect, so not affected by the seasons, climate, Hydraulic Oil Press all year round can be squeezed operation. Spiral Press has a high oil rate, energy saving, labor, wide use, pure oil, small footprint, high yield, four seasons are appropriate, unrestricted, efficient fine filtration, fast and convenient, extensive crushing, one-machine multi-purpose advantages. It is one of the first of the businesses operating edible oil processing equipment.
Hydraulic press belongs to the static oil production, Hydraulic Oil Press the oil rate relative to the spiral press is low, the power consumption is small, the equipment is many and the area is large. However, the mechanism oil of liquid pressing oil has the advantages of simple structure and power saving, it can be applied to some scattered oil (such as rice bran, wild oil), and the need to maintain special flavor or nutrition of oil (such as cocoa beans, olive oil, sesame seeds, etc.) of the grinding slurry. In addition, it can be used for the separation of the press of the solid fat or wax bran.
Working principle of Hydraulic Press:
Hydraulic oil machine is to use hydraulic fluid pressure through the pump, Hydraulic Oil Press the machine installed a temperature control device, so that oil in high pressure and high temperature state of the extraction machinery. According to the driving power source of the oil pump, there are two kinds of manual and electric; Hydraulic Oil Press The vertical hydraulic press base is fixed with 1 oil cylinders, the cylinder is fitted with cylindrical pistons, and the upper part of the piston is connected with the cake plate. Hydraulic Oil Press The billet is pressed into a round cake, a jacket cake circle, $number a round cake stacked between the cake plate and the top plate, the cake and cake is separated by a thin plate with a hole, driving the upper of the piston, producing pressure, squeezing the cake out of the oil. After the completion of the oil pump stop pressure, piston drop, the slag cake unloading, reload the material cake, so repeatedly oil, each squeeze about 2-5 hours. In the use of electric oil pump can be composed of circulation circuit system, while the operation of several hydraulic press. The structure and working principle of horizontal hydraulic press are basically the same as vertical, the equipment is easy to install, the flow oil is smooth, Hydraulic Oil Press the cake circle does not accumulate oil, but it occupies a large area and needs to be equipped with heavy hammer, pulley or screw mechanism. Hydraulic press pressure, a high oil rate, less moving parts, maintenance convenience, but the material cake loading and unloading labor intensity is also greater.
The advantages of Hydraulic press:
High efficiency and energy saving press is a combination of traditional squeezing principle and modern technology, compared with the ordinary oil press with high efficiency, environmental protection and energy saving, high value-added products, no loss, no noise, physical pressing without heating, Hydraulic Oil Press do not add any chemical raw materials, no oil, easy to operate, no easy to wear parts, long service life. The biggest advantage of hydraulic press is that equipment pressure is static pressure, oil mechanical friction is very little, squeeze out the grease is very clear, do not need to do any treatment can be directly edible, convenient and safe. The equipment has high pressure and high temperature to squeeze oil, almost so that oil can be squeezed out of the fuel.