Hydraulic press is the use of hydraulic oil pressure through the oil pump pressure, the machine installed on the temperature control device, so that the oil in the high pressure and high temperature oil out of the oil press. Hydraulic Oil Press According to the pump drive power source there are two kinds of manual and electric; according to the pressure to cast the bread can be divided into vertical and horizontal.
There is a cylinder on the base of the hydraulic press, and the cylinder is equipped with a cylindrical piston, and the upper part of the piston is integrated with the disc. Hydraulic Oil Press The billet is pre-pressed into a round cake, and the outer jacket is folded between 20 and 40 rounds of cake between the cake and the roof, and the cake and the cake are separated by a perforated thin plate to drive the top of the piston, Produce pressure, squeeze the cake out of oil. After pressing the pump to stop the pressure, Hydraulic Oil Press the piston down, the slag unloaded, re-loaded with cake, as a result of repeated intermittent oil, each pressing about 2 to 5 hours. In the use of electric oil pump can be composed of circulating oil system, while operating several hydraulic press operation. Horizontal hydraulic press structure and working principle and vertical basically the same, Hydraulic Oil Press the equipment is easy to install, smooth flow of oil, oil cake circle is not accumulated oil; but covers an area of large, need to be equipped with the back of the heavy hammer, pulley Or screw mechanism. Hydraulic press pressure, a high oil rate, less moving parts, easy maintenance; but the loading and unloading of labor intensity is also larger.
Hydraulic press is the biggest advantage of the equipment pressure is static pressure, oil mechanical friction is very small, squeezed out of the oil is very clear, do not need to do any treatment can be directly consumed, convenient and safe. That the equipment has a high pressure high temperature press oil, Hydraulic Oil Press almost can be out of oil can be pressed oil.
Hydraulic press is the use of traditional press and modern technology combined with the combination of modern oil press, with high efficiency, environmental protection and energy saving, high value-added products, no loss, no noise, physical compression without heating, do not add any chemical raw materials , No oil, easy to operate, no wearing parts, long service life.